Electric Rotary Coil clamp with racks

  Product features

  1. The clamp is driven by a torque motor and translated driven by the chain wheel, turbine worm reducer, rack and gear.

  2. The clamp has the edge protection function. The internal lateral sides of the clamp legs are equipped with two pairs of photoelectric correlative switches which make the clamp legs stop before contacting the steel coils so that the lateral sides of the legs will not have contact with the steel coils and not hurt them during lifting.

  3. Height centering function. The center holes of cold-rolled coils consist of two dimensions, i.e., ø508 and ø610. Two pairs of photoelectric correlative switches are installed on the top of the clamp jaws. During operation, only when the photoelectric switches shine a beam through the center holes of steel coils, is the clamp allowed to fasten, which makes it easy for operation

  4. After the steel coils are lifted, the machine is deadlocked so that the clamp will not open even in case of error operations.

  5. Clamp leg surface protection: A. The surface of clamp legs is cast with a 20 mm-thick polyurethane layer. B. The lateral bolts are fastened with polyurethane, and bottom bolts with aluminum protection plates.

  6. The clamp can be equipped with a rotary head if necessary which can rotate within the scope of 360° during operation.

  7. The clamp can be opened manually in case of accidents

  8. The clamp is equipped with other protection functions for electric apparatus and machines 

External and installation dimensions

Specification